#city

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Rock-fill dams are embankments of compacted free-draining granular earth with an impervious zone. The earth used often contains a high percentage of large particles, hence the term "rock-fill". The impervious zone may be on the upstream face and made of masonry, concrete, plastic membrane, steel sheet piles, timber or other material. The impervious zone may also be inside the embankment, in which case it is referred to as a "core". In the instances where clay is used as the impervious material, the dam is referred to as a "composite" dam. To prevent internal erosion of clay into the rock fill due to seepage forces, the core is separated using a filter. Filters are specifically graded soil designed to prevent the migration of fine grain soil particles. When suitable building material is at hand, transport is minimized, leading to cost savings during construction. Rock-fill dams are resistant to damage from earthquakes. However, inadequate quality control during construction can lead to poor compaction and sand in the embankment which can lead to liquefaction of the rock-fill during an earthquake. Liquefaction potential can be reduced by keeping susceptible material from being satura
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Only a relatively small stretch of the aqueduct still stands, consisting of 38 arched pillars standing 25 metres (82 ft) high along a course of some 830 metres (2,720 ft). It is constructed from opus mixtum – granite ashlar blocks interspersed with red brick – utilising a double arcade arrangement. The structure originally brought water to the city from a reservoir called the Proserpina Dam, fed by a stream called Las Pardillas, around 5 km (3.1 mi) to the north-west of Mérida. It is thought to have been constructed during the 1st century AD, with a second phase of building (or renovations) around 300 AD. In later centuries, the inhabitants of Mérida dubbed it the "Aqueduct of the Miracles" for the awe that it evoked. The aqueduct was one of three built at Mérida, the other two being the 15 kilometres (9.3 mi) long Aqua Augusta, fed by the Cornalvo reservoir, and San Lázaro, fed by underground channels.[3] The aqueduct is preserved as part of the Archaeological Ensemble of Mérida, a UNESCO World Heritage Site.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: This is a list of Roman dams and reservoirs. The study of Roman dam-building has received little scholarly attention in comparison to their other civil engineering activities, even though their contributions in this field have been ranked alongside their expertise in constructing the well-known Roman aqueducts, bridges, and roads.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: A drilling rig is an integrated system that drills wells, such as oil or water wells, or holes for piling and other construction purposes, into the earth's subsurface. Drilling rigs can be massive structures housing equipment used to drill water wells, oil wells, or natural gas extraction wells, or they can be small enough to be moved manually by one person and such are called augers. Drilling rigs can sample subsurface mineral deposits, test rock, soil and groundwater physical properties, and also can be used to install sub-surface fabrications, such as underground utilities, instrumentation, tunnels or wells. Drilling rigs can be mobile equipment mounted on trucks, tracks or trailers, or more permanent land or marine-based structures (such as oil platforms, commonly called 'offshore oil rigs' even if they don't contain a drilling rig). The term "rig" therefore generally refers to the complex equipment that is used to penetrate the surface of the Earth's crust.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Small to medium-sized drilling rigs are mobile, such as those used in mineral exploration drilling, blast-hole, water wells and environmental investigations. Larger rigs are capable of drilling through thousands of metres of the Earth's crust, using large "mud pumps" to circulate drilling mud (slurry) through the drill bit and up the casing annulus, for cooling and removing the "cuttings" while a well is drilled. Hoists in the rig can lift hundreds of tons of pipe. Other equipment can force acid or sand into reservoirs to facilitate extraction of the oil or natural gas; and in remote locations there can be permanent living accommodation and catering for crews (which may be more than a hundred). Marine rigs may operate thousands of miles distant from the supply base with infrequent crew rotation or cycle.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Hyberaxes Montressigon

• Model: Artistic

• Size: 896 X 704 (0.63 MP)

• Used settings:

  • Prompt: hyberaxes montressigon
  • Face enhance: No
  • Upscale & Enhance: 0
  • Aspect Ratio: landscape

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Split-ring resonators (SRRs) in various test configurations have been shown to be extremely effective as radar absorbers. SRR technology can be used in conjunction with the technologies above to provide a cumulative absorption effect. SRR technology is particularly effective when used on faceted shapes that have perfectly flat surfaces that present no direct reflections back to the radar source (such as the F-117A). This technology uses photographic process to create a resist layer on a thin (about 0,1778 mm or 0,007") copper foil on a dielectric backing (thin circuit board material) etched into tuned resonator arrays, each individual resonator being in a "C" shape (or other shape—such as a square). Each SRR is electrically isolated and all dimensions are carefully specified to optimize absorption at a specific radar wavelength. Not being a closed loop "O", the opening in the "C" presents a gap of specific dimension which acts as a capacitor. At 35 GHz, the diameter of the "C" is near 5 mm. The resonator can be tuned to specific wavelengths and multiple SRRs can be stacked with insulating layers of specific thicknesses between them to provide a wide-band absorption of radar energ
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Rarely, a volcanic cone may fill with lava but not erupt. Lava which pools within the caldera is known as a lava lake. Lava lakes do not usually persist for long, either draining back into the magma chamber once pressure is relieved (usually by venting of gases through the caldera), or by draining via eruption of lava flows or pyroclastic explosion.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: A public address system (or PA system) is an electronic system comprising microphones, amplifiers, loudspeakers, and related equipment. It increases the apparent volume (loudness) of a human voice, musical instrument, or other acoustic sound source or recorded sound or music. PA systems are used in any public venue that requires that an announcer, performer, etc. be sufficiently audible at a distance or over a large area. Typical applications include sports stadiums, public transportation vehicles and facilities, and live or recorded music venues and events. A PA system may include multiple microphones or other sound sources, a mixing console to combine and modify multiple sources, and multiple amplifiers and loudspeakers for louder volume or wider distribution.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: An optical fiber, or optical fibre in Commonwealth English, is a flexible, transparent fiber made by drawing glass (silica) or plastic to a diameter slightly thicker than that of a human hair. Optical fibers are used most often as a means to transmit light between the two ends of the fiber and find wide usage in fiber-optic communications, where they permit transmission over longer distances and at higher bandwidths (data transfer rates) than electrical cables. Fibers are used instead of metal wires because signals travel along them with less loss; in addition, fibers are immune to electromagnetic interference, a problem from which metal wires suffer. Fibers are also used for illumination and imaging, and are often wrapped in bundles so they may be used to carry light into, or images out of confined spaces, as in the case of a fiberscope. Specially designed fibers are also used for a variety of other applications, some of them being fiber optic sensors and fiber lasers.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: A computer is a machine that can be programmed to carry out sequences of arithmetic or logical operations (computation) automatically. Modern digital electronic computers can perform generic sets of operations known as programs. These programs enable computers to perform a wide range of tasks. A computer system is a nominally complete computer that includes the hardware, operating system (main software), and peripheral equipment needed and used for full operation. This term may also refer to a group of computers that are linked and function together, such as a computer network or computer cluster.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Early computers were meant to be used only for calculations. Simple manual instruments like the abacus have aided people in doing calculations since ancient times. Early in the Industrial Revolution, some mechanical devices were built to automate long, tedious tasks, such as guiding patterns for looms. More sophisticated electrical machines did specialized analog calculations in the early 20th century. The first digital electronic calculating machines were developed during World War II. The first semiconductor transistors in the late 1940s were followed by the silicon-based MOSFET (MOS transistor) and monolithic integrated circuit chip technologies in the late 1950s, leading to the microprocessor and the microcomputer revolution in the 1970s. The speed, power and versatility of computers have been increasing dramatically ever since then, with transistor counts increasing at a rapid pace (as predicted by Moore's law), leading to the Digital Revolution during the late 20th to early 21st centuries.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Towers for support of the lines are made of wood either grown or laminated, steel or aluminum (either lattice structures or tubular poles), concrete, and occasionally reinforced plastics. The bare wire conductors on the line are generally made of aluminum (either plain or reinforced with steel or composite materials such as carbon and glass fiber), though some copper wires are used in medium-voltage distribution and low-voltage connections to customer premises. A major goal of overhead power line design is to maintain adequate clearance between energized conductors and the ground so as to prevent dangerous contact with the line, and to provide reliable support for the conductors, resilience to storms, ice loads, earthquakes and other potential damage causes. Today overhead lines are routinely operated at voltages exceeding 765,000 volts between conductors.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: In electrical engineering, a disconnector, disconnect switch or isolator switch is used to ensure that an electrical circuit is completely de-energized for service or maintenance. They are often found in electrical distribution and industrial applications, where machinery must have its source of driving power removed for adjustment or repair. Disconnectors can be operated manually or by a motor, and may be paired with an earthing switch to ground the portion that has been isolated from the system for ensuring the safety of equipment and the personnel working on it.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: A lava flow is an outpouring of lava during an effusive eruption. (An explosive eruption, by contrast, produces a mixture of volcanic ash and other fragments called tephra, not lava flows.) The viscosity of most lava is about that of ketchup, roughly 10,000 to 100,000 times that of water. Even so, lava can flow great distances before cooling causes it to solidify, because lava exposed to air quickly develops a solid crust that insulates the remaining liquid lava, helping to keep it hot and inviscid enough to continue flowing.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: A fissure vent, also known as a volcanic fissure, eruption fissure or simply a fissure, is a linear volcanic vent through which lava erupts, usually without any explosive activity. The vent is often a few metres wide and may be many kilometres long. Fissure vents can cause large flood basalts which run first in lava channels and later in lava tubes. After some time, the eruption tends to become focused at one or more spatter cones. Small fissure vents may not be easily discernible from the air, but the crater rows (see Laki) or the canyons (see Eldgjá) built up by some of them are. The dikes that feed fissures reach the surface from depths of a few kilometers and connect them to deeper magma reservoirs, often under volcanic centers. Fissures are usually found in or along rifts and rift zones, such as Iceland and the East African Rift. Fissure vents are often part of the structure of shield volcanoes.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: A lava fountain is a volcanic phenomenon in which lava is forcefully but non-explosively ejected from a crater, vent, or fissure.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: A volcanic crater is an approximately circular depression in the ground caused by volcanic activity. It is typically a bowl-shaped feature containing one or more vents. During volcanic eruptions, molten magma and volcanic gases rise from an underground magma chamber, through a conduit, until they reach the crater's vent, from where the gases escape into the atmosphere and the magma is erupted as lava. A volcanic crater can be of large dimensions, and sometimes of great depth. During certain types of explosive eruptions, a volcano's magma chamber may empty enough for an area above it to subside, forming a type of larger depression known as a caldera.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Volcanic ash consists of fragments of rock, mineral crystals, and volcanic glass, created during volcanic eruptions and measuring less than 2 mm (0.079 inches) in diameter.[1] The term volcanic ash is also often loosely used to refer to all explosive eruption products (correctly referred to as tephra), including particles larger than 2 mm. Volcanic ash is formed during explosive volcanic eruptions when dissolved gases in magma expand and escape violently into the atmosphere. The force of the gases shatters the magma and propels it into the atmosphere where it solidifies into fragments of volcanic rock and glass. Ash is also produced when magma comes into contact with water during phreatomagmatic eruptions, causing the water to explosively flash to steam leading to shattering of magma. Once in the air, ash is transported by wind up to thousands of kilometres away.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Venus is the second planet from the Sun. It is sometimes called Earth's "sister" or "twin" planet as it is almost as large and has a similar composition. As an interior planet to Earth, Venus (like Mercury) appears in Earth's sky never far from the Sun, either as morning star or evening star. Aside from the Sun and Moon, Venus is the brightest natural object in Earth's sky, capable of casting visible shadows on Earth in dark conditions and being visible to the naked eye in broad daylight.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0