#architecture

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: In vacuum tubes and gas-filled tubes, a hot cathode or thermionic cathode is a cathode electrode which is heated to make it emit electrons due to thermionic emission. This is in contrast to a cold cathode, which does not have a heating element. The heating element is usually an electrical filament heated by a separate electric current passing through it. Hot cathodes typically achieve much higher power density than cold cathodes, emitting significantly more electrons from the same surface area. Cold cathodes rely on field electron emission or secondary electron emission from positive ion bombardment, and do not require heating. There are two types of hot cathode. In a directly heated cathode, the filament is the cathode and emits the electrons. In an indirectly heated cathode, the filament or heater heats a separate metal cathode electrode which emits the electrons.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Plasma lamps are a type of electrodeless gas-discharge lamp energized by radio frequency (RF) power. They are distinct from the novelty plasma lamps that were popular in the 1980s. The internal-electrodeless lamp was invented by Nikola Tesla after his experimentation with high-frequency currents in evacuated glass tubes for the purposes of lighting and the study of high voltage phenomena. The first practical plasma lamps were the sulfur lamps manufactured by Fusion Lighting. This lamp suffered several practical problems and did not prosper commercially. Plasma lamps with an internal phosphor coating are called external electrode fluorescent lamps (EEFL); these external electrodes or terminal conductors provide the radio frequency electric field.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Quantum mechanics is a fundamental theory in physics that provides a description of the physical properties of nature at the scale of atoms and subatomic particles.[2]: 1.1  It is the foundation of all quantum physics including quantum chemistry, quantum field theory, quantum technology, and quantum information science.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Helium (from Greek: ἥλιος, romanized: helios, lit. 'sun') is a chemical element with the symbol He and atomic number 2. It is a colorless, odorless, tasteless, non-toxic, inert, monatomic gas and the first in the noble gas group in the periodic table.[a] Its boiling point is the lowest among all the elements, and it does not have a melting point at standard pressure. It is the second lightest and second most abundant element in the observable universe, after hydrogen. It is present at about 24% of the total elemental mass, which is more than 12 times the mass of all the heavier elements combined. Its abundance is similar to this in both the Sun and in Jupiter, due to the very high nuclear binding energy (per nucleon) of helium-4, with respect to the next three elements after helium. This helium-4 binding energy also accounts for why it is a product of both nuclear fusion and radioactive decay. The most common isotope of helium in the universe is helium-4, the vast majority of which was formed during the Big Bang. Large amounts of new helium are created by nuclear fusion of hydrogen in stars.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Until the end of the 19th century, the only welding process was forge welding, which blacksmiths had used for millennia to join iron and steel by heating and hammering. Arc welding and oxy-fuel welding were among the first processes to develop late in the century, and electric resistance welding followed soon after. Welding technology advanced quickly during the early 20th century as world wars drove the demand for reliable and inexpensive joining methods. Following the wars, several modern welding techniques were developed, including manual methods like shielded metal arc welding, now one of the most popular welding methods, as well as semi-automatic and automatic processes such as gas metal arc welding, submerged arc welding, flux-cored arc welding and electroslag welding. Developments continued with the invention of laser beam welding, electron beam welding, magnetic pulse welding, and friction stir welding in the latter half of the century. Today, as the science continues to advance, robot welding is commonplace in industrial settings, and researchers continue to develop new welding methods and gain greater understanding of weld quality.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Welding is a fabrication process that joins materials, usually metals or thermoplastics, by using high heat to melt the parts together and allowing them to cool, causing fusion. Welding is distinct from lower temperature techniques such as brazing and soldering, which do not melt the base metal (parent metal).
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Metallurgy is a domain of materials science and engineering that studies the physical and chemical behavior of metallic elements, their inter-metallic compounds, and their mixtures, which are known as alloys. Metallurgy encompasses both the science and the technology of metals; that is, the way in which science is applied to the production of metals, and the engineering of metal components used in products for both consumers and manufacturers. Metallurgy is distinct from the craft of metalworking. Metalworking relies on metallurgy in a similar manner to how medicine relies on medical science for technical advancement. A specialist practitioner of metallurgy is known as a metallurgist.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Casting is a manufacturing process in which a liquid material is usually poured into a mold, which contains a hollow cavity of the desired shape, and then allowed to solidify. The solidified part is also known as a casting, which is ejected or broken out of the mold to complete the process. Casting materials are usually metals or various time setting materials that cure after mixing two or more components together; examples are epoxy, concrete, plaster and clay. Casting is most often used for making complex shapes that would be otherwise difficult or uneconomical to make by other methods. Heavy equipment like machine tool beds, ships' propellers, etc. can be cast easily in the required size, rather than fabricating by joining several small pieces.[1] Casting is a 7,000-year-old process. The oldest surviving casting is a copper frog from 3200 BC.[2]
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: In metallurgy, hot working refers to processes where metals are plastically deformed above their recrystallization temperature. Being above the recrystallization temperature allows the material to recrystallize during deformation. This is important because recrystallization keeps the materials from strain hardening, which ultimately keeps the yield strength and hardness low and ductility high.[1] This contrasts with cold working.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Gaskets can be produced by punching the required shape out of a sheet of flat, thin material, resulting in a sheet gaskets. Sheet gasket are fast and cheap to produce, and can be produced from a variety of materials, among them fibrous materials and matted graphite (and in the past - compressed asbestos). These gaskets can fill various different chemical requirements based on the inertness of the material used. Non-asbestos gasket sheet is durable, of multiple materials, and thick in nature. Material examples are mineral, carbon or synthetic rubbers such as EPDM, Nitrile, Neoprene, Natural, SBR Insertion - each of which have unique properties suitable for different applications.[5] Applications using sheet gaskets involve acids, corrosive chemicals, steam or mild caustics. Flexibility and good recovery prevent breakage during installation of a sheet gasket.[6]
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Gaskets are normally made from a flat material, a sheet such as paper, rubber, silicone, metal, cork, felt, neoprene, nitrile rubber, fiberglass, polytetrafluoroethylene (otherwise known as PTFE or Teflon) or a plastic polymer (such as polychlorotrifluoroethylene).
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: A vacuum chamber is a rigid enclosure from which air and other gases are removed by a vacuum pump. This results in a low-pressure environment within the chamber, commonly referred to as a vacuum. A vacuum environment allows researchers to conduct physical experiments or to test mechanical devices which must operate in outer space (for example) or for processes such as vacuum drying or vacuum coating. Chambers are typically made of metals which may or may not shield applied external magnetic fields depending on wall thickness, frequency, resistivity, and permeability of the material used. Only some materials are suitable for vacuum use.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: A laboratory is a facility that provides controlled conditions in which scientific or technological research, experiments, and measurement may be performed. Laboratories are found in a variety of settings like: schools, universities, privately owned research institutions, corporate research and testing facilities like ones found at pharmaceutical and petrochemical companies, government regulatory and forensic investigation centers, physicians' offices, clinics, hospitals, regional and national referral centers, and even occasionally personal residences.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: volcano
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: A commutator is a rotary electrical switch in certain types of electric motors and electrical generators that periodically reverses the current direction between the rotor and the external circuit. It consists of a cylinder composed of multiple metal contact segments on the rotating armature of the machine. Two or more electrical contacts called "brushes" made of a soft conductive material like carbon press against the commutator, making sliding contact with successive segments of the commutator as it rotates. The windings (coils of wire) on the armature are connected to the commutator segments.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: A linear motor is an electric motor that has had its stator and rotor "unrolled", thus, instead of producing a torque (rotation), it produces a linear force along its length. However, linear motors are not necessarily straight. Characteristically, a linear motor's active section has ends, whereas more conventional motors are arranged as a continuous loop.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: A comet is an icy, small Solar System body that warms and begins to release gases when passing close to the Sun, a process called outgassing. This produces an extended, gravitationally unbound atmosphere or coma surrounding the nucleus, and sometimes a tail of gas and dust gas blown out from the coma. These phenomena are due to the effects of solar radiation and the outstreaming solar wind plasma acting upon the nucleus of the comet. Comet nuclei range from a few hundred meters to tens of kilometers across and are composed of loose collections of ice, dust, and small rocky particles. The coma may be up to 15 times Earth's diameter, while the tail may stretch beyond one astronomical unit. If sufficiently close and bright, a comet may be seen from Earth without the aid of a telescope and can subtend an arc of up to 30° (60 Moons) across the sky. Comets have been observed and recorded since ancient times by many cultures and religions.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Another MEMS-based accelerometer is a thermal (or convective) accelerometer.[7] It contains a small heater in a very small dome. This heats the air or other fluid inside the dome. The thermal bubble acts as the proof mass. An accompanying temperature sensor (like a thermistor; or thermopile) in the dome measures the temperature in one location of the dome. This measures the location of the heated bubble within the dome. When the dome is accelerated, the colder, higher density fluid pushes the heated bubble. The measured temperature changes. The temperature measurement is interpreted as acceleration. The fluid provides the damping. Gravity acting on the fluid provides the spring. Since the proof mass is very lightweight gas, and not held by a beam or lever, thermal accelerometers can survive high shocks. Another variation uses a wire to both heat the gas and detect the change in temperature. The change of temperature changes the resistance of the wire. A two dimensional accelerometer can be economically constructed with one dome, one bubble and two measurement devices.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Mechanical accelerometers are often designed so that an electronic circuit senses a small amount of motion, then pushes on the proof mass with some type of linear motor to keep the proof mass from moving far. The motor might be an electromagnet or in very small accelerometers, electrostatic. Since the circuit's electronic behavior can be carefully designed, and the proof mass does not move far, these designs can be very stable (i.e. they do not oscillate), very linear with a controlled frequency response. (This is called servo mode design.) In mechanical accelerometers, measurement is often electrical, piezoelectric, piezoresistive or capacitive. Piezoelectric accelerometers use piezoceramic sensors (e.g. lead zirconate titanate) or single crystals (e.g. quartz, tourmaline). They are unmatched in high frequency measurements, low packaged weight, and resistance to high temperatures. Piezoresistive accelerometers resist shock (very high accelerations) better. Capacitive accelerometers typically use a silicon micro-machined sensing element. They measure low frequencies well.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: The Mobile Asteroid Surface Scout (MASCOT) was developed by the German Aerospace Center (DLR) in cooperation with the French space agency CNES.[56] It measures 29.5 cm × 27.5 cm × 19.5 cm (11.6 in × 10.8 in × 7.7 in) and has a mass of 9.6 kg (21 lb).[57] MASCOT carries four instruments: an infrared spectrometer (MicrOmega), a magnetometer (MASMAG), a radiometer (MARA), and a camera (MASCAM) that imaged the small-scale structure, distribution and texture of the regolith. The rover is capable of tumbling once to reposition itself for further measurements. It collected data on the surface structure and mineralogical composition, the thermal behaviour and the magnetic properties of the asteroid. It has a non-rechargeable battery that allowed for operations for approximately 16 hours. The infrared radiometer on the InSight Mars lander, launched in 2018, is based on the MASCOT radiometer. MASCOT was deployed 3 October 2018. It had a successful landing and performed its surface mission successfully. Two papers were published describing the results from MASCOT in the scientific journals Nature Astronomy and Science.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0